-
Cisco Meraki
- Cisco Meraki MS450 Series
- Cisco Meraki MS390 Series
- Cisco Meraki MS355 Series
- Cisco Meraki MS350 Series
- Cisco Meraki MS250 Series
- Cisco Meraki MS225 Series
- Cisco Meraki MS210 Series
- Cisco Meraki MS130 Series
- Cisco Meraki MS125 Series
- Cisco Meraki MS120 Series
- Cisco Meraki Catalyst 9300
- Cisco Meraki Catalyst 9300L
- Cisco Meraki Catalyst 9300X
| TS-351-2G Specification | |
| CPU | Intel® Celeron® J1800 2-core/2-thread processor, burst up to 2.58 GHz |
| CPU Architecture | 64-bit x86 |
| Graphic Processors | Intel® HD Graphics |
| Floating Point Unit | √ |
| Hardware-accelerated Transcoding | √, up to 1080P |
| System Memory | 2 GB SODIMM DDR3L (1 x 2 GB) |
| Maximum Memory | 8 GB (2 x 4 GB) |
| Memory Slot | 2 x SO-DIMM DDR3L
When installing two memory modules, please ensure that they are the same size and ideally use the same type of RAM for both memory slots. |
| Flash Memory | 512MB (Dual boot OS protection) |
| Drive Bay | 3 x 3.5-inch SATA 6Gb/s, 3Gb/s
Bay 1, 2: SATA 3Gbps |
| Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drivesAn optional 2.5″ drive tray base (TRAY-25-NK-BLK03) is needed to install a 2.5″ SSD/HDD |
| Hot-swappable | √ |
| M.2 Slot | 2 x M.2 2280 NVMe 500 MB/s slots |
| SSD Cache Acceleration Support | Drive bay 3 M.2 Slots 1 to 2 |
| Gigabit Ethernet Port (RJ45) | 1 |
| Wake on LAN (WOL) | √ |
| Jumbo Frame | √ |
| USB 2.0 port | 2 |
| USB 3.2 Gen 1 port | 1 |
| HDMI Output | 1, HDMI 1.4a (up to 1080p) |
| Audio Output | 1 x built-in speaker, 1 x 3.5mm line out jack (for amplifiers or speakers) |
| Form Factor | Tower |
| LED Indicators | System Status, LAN, USB, HDD1~3, M.2 SSD1~2 |
| Buttons | Power, Reset, USB Copy |
| Dimensions (HxWxD) | 142 × 150 × 260.1 mm |
| Operating temperature | 0 – 40 °C (32°F – 104°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27ËšC (80.6ËšF) |
| Power Supply Unit | 65W adapter, 100 – 240V |
| Power Consumption: HDD Sleep Mode | 18.56 W |
| Power Consumption: Operating Mode, Typical | 26.22 W
Tested with drives fully populated. |
| Fan | 1 x 90mm, 12VDC |
| Sound Level | 21.8 db(A) |
| System Warning | Voice prompts or Buzzer |
| Kensington Security Slot | √ |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 1500 |
