| Model Name |
ZKTeco FBL4211 |
| Type |
Flap Barrier (Access Control Turnstile) |
| Body Material |
Stainless Steel (Brushed Finish) |
| Barrier Type |
Flap-type (Automatic Flap Barrier for entrance/exit control) |
| Display |
LED Indicators (Green/Red) |
| Communication Protocols |
– TCP/IP |
|
– Wiegand (26/34 bits) |
| Control System Interface |
– ZKTeco Access Control System |
|
– Third-party access control systems (via relay outputs) |
| Power Supply |
110V-240V AC ± 10% |
| Current Consumption |
150W (Typical) |
| Relay Output |
1 Relay Output for door control (NO/NC) |
| Flap Movement Speed |
0.3 seconds (Quick opening/closing) |
| Flap Dimensions (W x H) |
300 mm x 1200 mm |
| Throughput Capacity |
Up to 30-35 people per minute |
| Operating Temperature |
-20°C to 60°C |
| Operating Humidity |
5% to 80% RH |
| Storage Temperature |
-40°C to 80°C |
| Dimensions (L x W x H) |
1400 x 200 x 980 mm |
| Weight |
40-45 kg (approx.) |
| Mounting Type |
Floor Mount (for permanent installation) |
| Enclosure Rating |
IP42 (Dustproof and Limited Water Resistance) |
| Emergency Function |
Anti-panic (flap opens automatically in case of emergency) |
| Security Features |
– Anti-tailgating |
|
– Anti-intrusion sensors |
| Sensor Technology |
Infrared Sensors (for accurate detection) |
| LED Indicators |
– Green: Access Granted |
|
– Red: Access Denied |
|
– Yellow: In Transit (or standby) |
| Operation Modes |
– Single Pass |
|
– Continuous Flow (with configured delays) |
| Integration with Access Control |
Supports integration with RFID, Fingerprint, PIN, QR Code readers |
| Firmware Upgrade |
USB / Network-based firmware upgrade |
